1/8" Baltic Birch Plywood Sheets
Our Baltic Birch Plywood is unlike the plywood you're used to seeing at the hardware stores. It is manufactured in the Baltic region of northeastern Europe using solid one-piece Birch veneer for each ply. The plys are cross-banded and glued together. The result, a superior plywood that not only looks good but has exceptional stability and strength.
Thick Face Veneer: Unlike traditional plywood with paper thin veneer on the outside Baltic Birch Plywood features thick outer veneers that is more resistant to damage and is not as easily sanded through. All our Baltic Birch Plywood sheets are B/BB grade. The front side is clear and free of defects like large knots. Small pin knots and some dark streaks are allowed. The back side may occasionally have a few football shaped patches where a knot was removed.
Good for Laser Cutting and Engraving: Baltic Birch Plywood comes in large sheets and is one of the few wooden sheet-good materials that is consistently dense enough through its thickness to be cut with a laser. And while it is more stable than solid hardwood the thin stock like 1/8" and 1/4" is simply to thin and wide to always stay perfectly flat. Most pieces will lay flat enough to cut right on your laser bed but consider making a jig or frame to hold more unruly pieces flat. Usually all you need is a few pieces of tape to hold it down to a flat surface.
Our Baltic Birch Plywood is Grade B/BB Clear and free of defects on one side with very few voids or glue pockets. No added formaldehyde.| SKU | HWB-BIRCH |
|---|---|
| Manufacturer | Synergy Crafts |
| Country of Manufacture | Russia |
Huge Selection - Low Prices
Because everyone affordable choices.
Synergy Craft's is dedicated to offering the widest selection of top brand products found anywhere, at exceptionally competitive prices.